Note sull'episodio
Multicolour 3D printing looks like magic: one machine, one nozzle, and a figurine comes off the plate already painted. This episode opens the lid on how that actually happens, from the filament changers that swap spools hundreds of times in a single print, to tool changers that avoid the swap entirely, to the humble pause-and-swap trick anyone can do. Along the way it explains the dirty secret of the hobby: on a busy five-colour print, the pile of purged plastic can outweigh the model itself.
You'll come away understanding how a single-nozzle colour change works and why every change throws away a fraction of a gram to a couple of grams of filament; why a five-colour figurine can take three to five times longer than the same model in one colour; how colour gets into a model in the first place, through painting in the slicer and the 3MF file that carries the result; what multi-material printing adds beyond colour, including water-soluble supports and flexible-plus-rigid parts; and the design habits that cut waste and cost, like stacking colours by height and limiting colours per layer.
Practical tip: before you buy a filament changer or order a multicolour print, slice the model and read the filament and time figures in the preview. The slicer already knows how much will go into the bin, and it will happily tell you.
Need something printed? Upload your STL, 3MF, OBJ or STEP file at www.3dprinting.zone for an instant price, shipped Australia-wide.
Sources: Bambu Lab Wiki and Blog, Prusa Knowledge Base, Bambu Lab Community Forum, 3MF Consortium, Polymaker, HueForge, XDA Developers, Bambu Lab, Creality, Anycubic and Prusa stores, 3dprinting.zone.